Press PVR-100 is intended for blanking of parts from strip material. Function operations: Blanking. Technical features: Production rate, pcs per minute 700 Power consumption, kW 15.64 Compressed air consumption, m³/h 10.5 Overall dimensions without packing, LxWxH, mm 2800х1700х2900 Net weight, kg 13170 Capacity of press, ton-force 100 Traverse stroke, mm 30 Ram stroke frequency, min-1 140 Feed pitch of material: maximal / minimal, mm 40 /17 Voltage, V / Current frequency, Hz 380 / 50

Machine SPG-1 is intended for the manufacture of billets of the first and second drawing, recrystallization annealing of billets after the second drawing and further cooling. Function operations: • First cupping/drawing • Recrystallization annealing • Second drawing • Cooling Technical features Production rate, pcs per minute 200+20 Quantity of air aspirated by exhaust ventilation, m³/h 600 Operation factor, not less than 0.85 Power consumption (installed), kW 62.56 Water flow rate, m³/h 4.3 Compressed air consumption, m³/h 8.7 Overall dimensions without packing, LxWxH, mm 3730x1050x2720 Net weight, kg 7300±50

Machine SPG-2 is intended for third and fourth drawings, and for first and second cutting of cartridge case billets. Function operations: • Third drawing • Fourth drawing • First cutting • Second cutting Technical features: Production rate, pcs per minute 200+20 Operation factor, not less than 0.85 Power consumption (installed), kW 29.8 Water flow rate, m³/h 2.3 Compressed air consumption, m³/h 0.66 Overall dimensions without packing, LxWxH, mm 3748x1050x2720 Net weight, kg 7200 Machine SPG-3 is intended for manufacture of cartridge case forming billets. Function operations: • First forming • 100% automatic check of primer pocket depth • Second forming • 100% automatic check of anvil depth • 100% automatic check of primer pocket diameter • Flash hole piercing • Edge finishing of flash hole • 100% automatic check of flash hole presence Technical features: Production rate, pcs per minute 200+20 Operation factor, not less than 0.85 Power consumption, kW 20.93 Water flow rateoling, m³/h 0.5 Overall dimensions without packing, LxWxH, mm 4435x1065x2375 Net weight, kg 7700

Machine SPG-4 is intended for tapering of cartridge case billet. Function operations: • Mouth annealing • Saponification • Cooling • First tapering • Pickling • Second tapering • Rinsing • Rinsing • Phosphatizatoin • Drying Technical features: Production rate, pcs per minute 200+20 Operation factor, not less than 0.85 Power consumption, kW 66 Water flow rate, m³/h 4.0 Consumption of steam, kg/h 50 Steam consumption, m³/h 35 Air change rate, consumed by exhaust ventilation, m³/h 2500 Overall dimensions without packing, LxWxH, mm 4990x1665x2396 Net weight, kg 11700 Product-flow time for cases, min 9 Machine SPG-5 is intended for cartridge cases machining and control. Function operations: • Grooving • Calibration • Cutting of mouths • 100% rim height check • 100% extraction groove diameter check • 100% cartridge case length check Technical features: Production rate, pcs per minute 200+20 Operation factor, not less than 0.85 Power consumption, kW 5.5 Steam consumption, m³/h 2.5 Overall dimensions without packing, LxWxH, mm 3246x910x2200 Net weight, kg 6800

Machine SPG-6 is intended for complete automatic control of the cartridge case dimensions and visual quality inspection of cartridge case surface alongside with further conditional rejection of the flow. Function operations: • 100% automatic control by calibration chamber • 100% automatic control of anvil depth • 100% automatic control of pocket diameter • 100% automatic control of flash hole presence Technical features: Production rate, pcs per min 200+20 Operation factor, not less than 0.85 Power consumption, (installed), kW 3.0 Overall dimensions without packing, LxWxH, mm 2115x880x2040 Net weight, kg 3900 Machine SPG-7 is intended for visual quality control of cartridge case surface. Function operations: • 100% visual quality control Technical features: Production rate, pcs per minute 285±15 Power consumption, kW 0.6 Overall dimensions without packing, LxWxH, mm 2670x600x1560 Net weight, kg 700

Machine SPP-1 is intended for manufacture of bullet jackets. Function operations: • First drawing • Third tapering • Second drawing • Fourth tapering • First tapering • Jacket cutting • Second tapering • Jacket expanding Technical features: Production rate, pcs per minute 200+20 Operation factor, not less than 0.85 Power consumption, kW 30 Water flow rate, m³/h 1.0 Overall dimensions without packing, LxWxH, mm 4360x1100x2397 Net weight, kg 10000 Machine SPP-2 is intended for manufacture of lead jacket and preliminary bullet assembly. Function operations: • Lead billet cutting • First forming • Second forming • Drying • Insertion of core into jacket • Insertion of unit with core into jacket • 100% visual control and preliminary folding of jacket ends Technical features: Production rate, pcs per minute 200+20 Operation factor, not less than 0.85 Power consumption, kW 16.7 Air change rate, consumed by exhaust ventilation, m³/h 2000 Overall dimensions without packing, LxWxH, mm 3955x1310x2030 Net weight, kg 6000

Machine SPP-3 is intended for the bullet assembly. Function operations: • Final insertion of unit with core into bullet jacket and flanging of jacket ends • First tapering of bullet jacket boat-tail • First flanging of jacket ends • Second flanging of jacket ends • Second tapering of bullet boat-tail • Diametrical calibration of bullet • Bullet knurling • 100% automatic control of bullet main diameter • 100% automatic control of bullet boat-tail length • 100% automatic control of bullet length • 100% automatic control of bullet weight Technical features: Production rate, pcs per minute 200+20 Operation factor, not less than 0.85 Power consumption, kW 5.5 Overall dimensions without packing, LxWxH, mm 4085x840x2030 Net weight, kg 6500 Machine SPP-4 is intended for visual quality control of bullet surface. Function operations: • 100% visual control of bullets Technical features: Production rate, pcs per minute (120±10)x2 Power consumption, kW 1.0 Overall dimensions without packing, LxWxH, mm 1445x850x1400 Net weight, kg 350

Machine SKP-7 is intended for insertion of primer into cartridge case. Function operations: • Primer insertion • 100% automatic control of primer insertion depth Technical features: Production rate, pcs per minute 200+20 Operation factor, not less than 0.85 Power consumption, kW 1.6 Steam consumption, m³/h 7.0 Pressure, MPa 0.2 Overall dimensions without packing, LxWxH, mm 2010x880x1965 Net weight, kg 3700 Machine SSP-7 is intended for assembly, geometrical and weight control of cartridges. Function operations: • Case mouth expanding • Powder chamber filling • 100% automatic control of cartridge case body length • Propellant presence control • 100% automatic control of cartridge length • Preliminary assembly of bullet and cartridge case • 100% automatic control of cartridge weight • Tapering of cartridge mouth • 100% automatic control of cartridge configuration Technical features: Production rate, pcs per minute 200+20 Operation factor, not less than 0.85 Power consumption, kW 2.0 Overall dimensions without packing, LxWxH, mm 3680x1170x2000 Net weight, kg 5600

Machine SGP-7 is intended for the sealing (hermetization) of the cartridge of caliber 7.62. Function operations: - sealing on the mouth; - sealing on primer; - drying; - visual inspection. Technical features: Production rate, pcs per minute 200+20 Power consumption, kW 1.8 Compressed air consumption, math 7 Pressure, MPa 0.2 Overall dimensions without packing, LxWxH, mm 2660x1626x1700 Net weight, kg 4160 Machine SSU-7 is intended for the cartridge packaging. Function operations: - Arrangement of cartridges in rows - Package forming - Stitching of package flaps - Weighing of cartridge package - Magnetic neutralization of the cartridges in package Technical features: Production rate, pcs per minute 200+20 Power consumption, kW 2.1 Overall dimensions without packing, LxWxH, mm 2570x1300x1570 Net weight, kg 1700

Machine SKG-127 (145) is intended for the insertion of primer into cartridge case, control of primer insertion depth and crimping for the cartridges of calibers 12.7x108, 12.7x99, 14.5x114 mm. Function operations: • Primer insertion • 100% automatic control of primer insertion depth • Primer punching Technical features: Production rate, pcs per minute 60±5 Operation factor, not less than 0.85 Power consumption, kW 1.5 Overall dimensions without packing, LxWxH, mm 2600±50x1000x2400 Net weight, kg 2700±50 Machine SSP-127 (145) is intended for the loading and assembly of cartridges of calibers 12.7x108, 12.7x99, 14.5x114 mm. Function operations: • Case mouth expending • First and second control of case and primer presence • First and second powder chamber filling • Propellant presence control • Preliminary and final assembly of the bullet and cartridge case • Bullet presence control • First and second tapering of cartridge mouth • 100 % automatic control of cartridge configuration • 100 % automatic control of cartridge length Technical features: Production rate, pcs per minute 41±1 Operation factor, not less than 0.85 Power consumption, kW 2.8 Overall dimensions without packing, LxWxH, mm 1816x1100x2573 Net weight, kg 700±50